Filter
Top Products
9
the display will revert to showing the current room humidity. If you set a timer but no longer wish to have
it set, turn the unit off and then repeat steps 1 and 2.
STEP 4: SET HUMIDITY
• You can set your desired humidity in 1% increments anywhere from 25% to 65%.
• To set your desired humidity, press the humidity button ( ) up or down (Fig. 13).
• When the display indicates your desired humidity setting wait 3 seconds.
• After 3 seconds your desired humidity is set and the display will revert back to showing the current
room humidity.
NOTE: If you wish to change your humidity setting or check to see
what you set, simply press the humidity button once and it will
show you the set humidity. If you want to change it, continue to
push the button up or down until you have reached your new
desired humidity. Again, after 3 seconds the display will revert to
showing the current room humidity.
• Once you have set your humidity the unit will operate under this
setting until the unit is turned off or your selected humidity is
reached.
• When your desired room humidity has been reached the fan will
shut off and the house icon ( ) on the top of your display will
illuminate (Fig. 14). It will stay illuminated until your desired
humidity decreases at which time the fan will turn back on.
NOTE: Your room humidity can often fluctuate. It is normal for
your unit to turn itself on and off throughout the day as it is
monitoring your changing environment.
To go back to continuous mode, turn your unit off and then
back on and select your desired output setting (see step 2).
IONIZER FEATURE
The ionizer helps freshen the air.
• Press the Ionizer button once to start; the Ionizer light will illuminate. Note: The unit must be turned on
for the Ionizer to function.
• To turn off the ionizer, simply press the ionizer button again; the ionizer light will turn off.
NOTE: The ionizer automatically turns off when the desired humidity is reached (your desired humidity
light will be illuminated, see Fig. 7). It will turn back on again when your humidifier restarts.
Digital EasySet
™
Control Operation (Model HCM-6012i) (Continued)
Fig. 13
Fig. 14
QuietCare_Console_OM_Rev1.qx 8/25/06 1:32 PM Page 9