Filter
Top Products
Honeywell EC-P2 Instruction and Installation Manual
23
Notes:
None means there is no interference. 1.
A number indicates that when exposed to the interference gas, the sensor 2.
will react the specified amount for a given concentration. For example,
on the first line of the table above, if the NO
2
sensor is exposed to 1 ppm
Bromine (Br
2
), the sensor will read 0.5 ppm. This interference is in addition
to the target gas present.
For example, if an NH
3
sensor is exposed to 1 ppm NH
3
and 1 ppm Br
2
at
the same time, the reading will be 0.9 ppm