Filter
Top Products
– 17 –
Paging Feature
Your installer may have programmed your system to send messages
with certain system conditions to your pager. An explanation of those
messages is provided below.
Follow-Me Displays
The display shown on your pager is "ACCTEXXX" where:
"ACCT" is the 4-digit central station no. 2 account number.
"E" is the event code. There are 4 event types: alarms, troubles,
openings, and closings. These event codes are as follows:
Openings = 0, Closings = 1, Alarm or Trouble = 9
If multiple events occur, the signal for the highest-priority event is sent first.
Events ranked from highest to lowest priority are alarms, trouble, openings,
and closings.
"XXX" is, depending on the event, the zone (001-008) or user (001-014)
designation.
USER DESIGNATION FUNCTION
1-6 User Codes
7 Remote arm/disarm
8 Quick Arm No. 1, Quick Forced Arm No. 2
9-14 Keyfobs
Changing the Pager Follow-Me Phone Number
You can change your pager follow-me phone number as follows if your
installer enabled this feature: