Honeywell 3-144 Home Security System User Manual


 
17
Codes (User Type 3.6)
Purpose
The Codes menu option enables the managers, (user type 3.6), to
assign, modify and delete the codes that allow users to operate and
access the system. The codes option is divided into two sub–menus:
1. User Codes
Sub divided into 10 menus (depending on whether the group and
MAX Mode options are enabled) that determine all of the access
information for users with Personal Identification Numbers (PINs).
This menu also assigns MAX details to user numbers.
2. Pin Warning
This option determines the warning period given to users prior to
the programmed Pin Change date.
Note: The valid period for Pin Change codes is programmed by
the installation engineer.
Manager Code
The manager code is authorised to:
Program the USER CODES option for each of the user codes.
Allocate other codes to manager type 3.6.
Modify the manager PIN (the manager PIN cannot be deleted)
Assign the MAX features to the code.
The manager code defaults to group choice when groups are ena-
bled. The manager is able to toggle the group choice option on and
off (using the * key) as required.
The manager code defaults to accessing the quick menu.
Note: The MAX is the Proximity Access Reader which can be
connected to the Galaxy system. This also refers to the
MAX
3
, the enhanced version of the MAX.
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
PIN + ent
ent
CODES
1 = User Codes
>A
CODES
2 = PIN Warning
Table 2. Default Codes
yxalaGsedoCfo.oN
reganaM
NIPtluafeD.oNresU
84-30015432189
441-305254321842
025-399954321799