Filter
Top Products
4.Introduction of the Remote control Unit
NOTE
The illustration above pictures the remote control unit after the cover has
been lowered and removed.
When you press the buttons on the remote control unit,the mark appears in
the display to transmit the setting changes to the receiver in the air conditioner.
A temperature sensor inside the remote control unit senses the room
temperature.
Information on the operating conditions is displayed while the remote control
unit is switched on. If the unit is turned off, only the mode that was set
previously is still displayed.
For details, see Night Setback Mode . When you press this button, in the
HEAT, DRY or COOL mode, the mark appears in the display, the remote
control unit will automatically adjust the set temperature to save energy.
Press the button to increase the set temperature.
Press the button to reduce the set temperature.
This button is for turning the air conditioner on and off.
Transmitter
SENSOR
Display
SLEEP
button
buttons
TEMP. Setting
ON/OFF operation
button
6
1Сʱ
A
TEMP SETTEMPS ET
C
1HOUR
A
HOUR
ON
OFF
A
1 HR
TEMP
FAN
SPEED
H
.P.
O
N/OFF
FLAP
MODE
ON
OFF
SLEEP
SET CANCEL
ACL
A/C SENSOR
SENSOR
A/C SENSOR button
Transmitter
Battery compartment
(pull off the cover to expose the
batteries.)
(Cover closed)
TEMP.setting button
ON/OFF button
ACL button
4.Introduction of the Remote control Unit
Display
MODE selector button
SLEEP button
1 HR. TIMER button
HIGH POWER button
FLAP button
TIMER ON/OFF button
TIMER SET/CANCEL
button
FAN SPEED selector button