Filter
Top Products
22
Appendix: Installation
(3)Any part of the drainpipe should be below the outlet of the indoor unit
and the joints should be wrapped with waterproof adhesive tape to
prevent leakage of condensed water.
(4)Bind the tubes, wires and the drainpipe tightly with binding tape, with
the drainpipe under the wires.
(5)Press down the clamping plate of the tubes and fix the bound wires.
Install the indoor unit
(1)Pull the bound wires out through the wall hole and put the indoor wires
together with the indoor unit at the corresponding place of the wall plate.
(2)Hook the indoor unit onto the retaining claws on the wall plate and
move the unit body slightly to make sure that it is firm.
(3)Hold the two sides of the unit body and press it to the wall plate to
ensure secure connection.
4. Installation of the outdoor unit
Mount the outdoor unit
A. Mount the outdoor unit in the selected place.
B. If the outdoor unit is to be mounted on the wall, the wall and the
installation bracket should have sufficient intensity to bear the weight of
the outdoor unit.
(1)Place the outdoor unit carefully onto the bracket.
(2)Fix the unit onto the bracket with four bottom bolts. The bolts should
have anti-vibration pads to prevent falling down of the unit from vibration.
Connect the tubes of the outdoor unit
A. Electric wires
(1)Remove the wire cover of the outdoor unit with a screwdriver.
(2)Remove the wire clip.
(3)Connect the wires to the corresponding terminals on the terminal
panel.
(4)Tighten all the screws to ensure good connection.
(5)Put the wires into place with a clip and replace the wire cover.
B. Tubes
The connection of the outdoor tubes is the same as steps (1) and (2) of
the indoor unit.
Caution: All the " Y " -shaped terminals should be plugged into
the line bank and the grounding loop terminal should be
connected fully.
Caution: Never put extra wires into the wire compartment to
avoid damage from eddying flow heating.
Wire cover
Wire outlet
Tubes
Drainpipe
Tube clamping plate
Wires
Tubes
Drainpipe
Wall plate
Tubes
Wires
Drainpipe
Tube clamping plate