Filter
Top Products
Programming the Status System 13Chapter 2
Example commands using Standard Event registers:
*ESE 48 Generate a summary bit on execution or command errors.
*ESE? Query the state of the Standard Event enable register.
*ESR? Query the state of the Standard Event event register.
Standard Operation
Status Group
The Standard Operation Status group provides information about the
state of the measurement systems in an instrument. This status group is
accessed through the STATus subsystem. Standard Operation Status
includes a condition register, event register, and an enable register. As a
beginner, you will rarely need to use this group. Figure 2-6 illustrates the
structure of Standard Operation Status.
Figure 2-6. Questionable Data Status Group