Filter
Top Products
58
Heatilator • HEIR36, HEIR42, HEIR50 • 2285-900 Rev. D • 8/12
Log #5 (2285-705): Locate notched area on Log #1 that will be used to position Log #5. See Figure 2. Place Log #5 into
appliance with “burned” edge toward center of appliance. See Figure 11. Log will sit on bottom refractory and should be
about 1-1/2 inches from right grate tine. The center of the log should rest in notch on Log #3 and the top of Log #5 should
rest in the notch on Log #1.
Log #4 (2285-704): See Figure 8. Place Log #4 in appliance with burned edge facing center. The bottom of log #4 will rest
against left side refractory and on bottom refractory. Slide bottom of Log #4 toward front of appliance until it contacts back
side of Log #2. Rest top of Log #4 in notch on top left corner of Log #1. See Figure 2 and Figure 9.
Log #3 (2285-703): Place log in appliance as shown in Figure 7. Log #3 should contact right and right center grate tines
and also be about 1/4 inch from right side refractory.
Figure 7.
Figure 8.
6
6
5
5
Figure 6.
2
2
1
1
4
4
3
3
BURNED EDGE
BURNED EDGE
4
4
1
1
3
3
Figure 9.
Figure 10.
Figure 11.
5
5
NOTCH FOR LOG #6
NOTCH FOR LOG #6
LOG CONTACTS
LOG CONTACTS
REFRACTORY
REFRACTORY
BURNED EDGE
BURNED EDGE
LOG CONTACTS SIDE
LOG CONTACTS SIDE
REFRACTORY
REFRACTORY
1-1/2 IN.
1-1/2 IN.
(APPROXIMATELY)
(APPROXIMATELY)
LOG CONTACTS
LOG CONTACTS
GRATE TINES
GRATE TINES
1/4 IN. FROM LOG
1/4 IN. FROM LOG
TO REFRACTORY
TO REFRACTORY
NOTCH FOR LOG #5
NOTCH FOR LOG #5