Heath Zenith 6270 Series Door User Manual


  Open as PDF
of 28
 
-
+
-
+
-
+
Type “D”
Type “D”
Type “D”
© 2008 HeathCo LLC 595-5506-12
This package includes (Style of push button and chime may vary from illustration):
• Wirelesschime
• Wirelesspushbuttonwithbattery(Specicmodelsinclude2)
• Hardwarepack
This chime requires 3 “D” alkaline batteries (not included). In typical use,
alkalinebatterieswilllastuptothreeyears.
6180 Series, 6270 Series,
and 6280 Series
Decorative Wireless
Chime
Cover Mounting Tabs
Chime
Volume
Jumpers
Figure 1
WARNING: To prevent possible
SERIOUS INJURY or DEATH:
• NEVER allowsmallchildrennear
batteries.
• Ifbattery isswallowed,immediately
notifydoctor.
1. InstallalkalinetypeA2312voltpushbutton
battery(included). Remove back of case by
pushingintabonbottomwithasmallscrew-
driver(seeFigure1).Seediagraminsidepush
buttonforcorrectbatteryorientation.Note: If
batteries are preinstalled, remove orange
batterytab.
2. Install 3 alkaline “D” batteries. Make sure
batteriesareorientedproperly(seeFigure2).
3. Test range. Temporarily position chime and
pushbuttonwhereyouwantitmounted.
Press push button to verify chime and push
button work properly. Ifchime does not
sound, see Troubleshooting.
4. Adjust volume control. Adjust volume control
todesiredvolume(seeFigure2).
Figure 2
next