Heat & Glo LifeStyle XLR-PLUS-PB-AU Indoor Fireplace User Manual


  Open as PDF
of 77
 
27Heat & Glo • XLR-PLUS-N-AU, XLR-PLUS-PB-AU • 2264-900 Rev. M • 7/12
Figure7.5VerticalVentMaximum
Note: If installing a vertical vent/termination off the top of the
appliance, the optional exhaust restrictor may be needed.
V
1
V
1
Max=13.4m(44ft.)
TopVent-VerticalTermination
NoElbows
Note: Use SLP Series
components only.
ExhaustRestrictorInstructions
1. Locate the inner rebox exhaust restrictor. Figure 7.6.
Exhaust restrictors are recommended for these vertically
terminated products which have excessive draft. Exhaust
restrictors will compensate for high draft. and restore vi-
sual ame height. If the vent conguration has a total ver-
tical of 6-1/2 ft. - 44 ft. (2 m - 13.4 m), an exhaust restrictor
may be needed. The exhaust restrictor is located in the
appliance manual bag.
3. Replace existing restrictor with small cut-out restrictor
in manual bag for installations with more than 6-1/2 ft.
(2 m) of vertical piping. See Figure 7.7.
Figure7.6StandardRestrictor
Figure7.7RestrictorwithSmallCut-Out
2. Remove restrictor for XLR-LOGS kit.
 previous next