Filter
Top Products
20 Heat & Glo Lifestyle Collection • Dakota-AU• 4036-914 Rev B • 06/07
Although the frequency of fi replace servicing and maintenance will depend on use and the type of installation, a qualifi ed
service technician should perform an fi replace check-up annually.
Debris from any outside source and/or soot must be removed from the fi replace. Allow logs to cool, remove if necessary,
vacuum and replace in accordance with instructions on pages 13-16. It is imperative that control compartments, burners,
and circulating air passageways of the appliance be kept clean.
Annual inspection by qualified technician
recommended.
Check:
• Condition of doors, surrounds and fronts.
• Condition of glass, glass assembly.
• Obstructions of combustion and ventilation
air.
• Condition of logs.
• Condition of fi rebox.
• Burner ignition and operation.
• Burner air shutter adjustment.
• Gas connections and fi ttings.
Clean:
• Glass.
• Air passageways, grilles, control
compartment.
• Burner, burner ports.
Risk of:
• Fire
• Delayed ignition or explosion
• Exposure to combustion fumes
• Odors
WARNING
Handle glass assembly with care.
Note: Clean glass after initial 3-4 hours
operation. Longer operation without
cleaning glass may cause a permanent
white fi lm on glass.
When cleaning glass door:
• Avoid striking, scratching or slamming
doors.
• Do NOT use abrasive cleaners.
• Use a hard water deposit glass cleaner on
white fi lm.
• Do NOT clean glass when it is hot.
• Turn off fi replace after 3-4 hours of operation
and ALLOW TO COOL.
• Remove and clean glass assembly.
• Replace glass assembly and operate
fi replace for an additional 12 hours.
Refer to maintenance instructions.
CAUTION
10
10
Maintaining and Servicing the Fireplace
Risk of injury or property damage
Before servicing:
• Turn off gas.
• Disable remote control.
• Ensure fi replace is completely cooled.
• Remove door lock screw.
After Servicing:
• Replace door lock screw.
WARNING