Filter
Top Products
Heat & Glo • Cerona-36, Cerona-42 • 2106-900 Rev. A • 6/06
41
STEP 4.
LOG #3 (SRV2107-703):
Place the notch on the tip of log #3 over
the locating tab on log #1. Place the left
leg of the log on the far left grate tine (A).
STEP 5.
LOG #4 (SRV2107-704):
Place the left formed end of log #4 on the
burner detail located under log #3, and
the notch on the right end of log #4 on the
front grate bar.
STEP 6.
LOG #5 (SRV2107-705):
Place log #5 on the left side between the
grate tine and firebox. Note: This log will
be used to support log #6.
4
5
Figure 12.17
Figure 12.18
Figure 12.16
3
TAB
NOTCH FITS OVER FRONT GRATE BAR
NOTCH FITS
ON BURNER
DETAIL
A