Filter
Top Products
Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08 33
• Squeeze the open end of the bent baffl e with one
hand. Insert the baffl e bent side up into the inner fl ue
so that the bottom of the baffl e is above the bead on
the inside of the collar. See Figure 7.22.
• Release pressure on the baffl e so that it is wedged
against the sides of the fl ue collar. See Figure 7.23.
• Replace the glass (refer to Section 14.H.).
• Start the appliance.
Figure 7.22 Placing the Baffl e
Figure 7.23 Baffl e in Place