Filter
Top Products
29
P43 Pellet Stove
OPTIONS
Side Heat Shields
Side heat shields are available to reduce the
clearance to combustible materials.
Part #1-00-00000
Hopper Extension
The hopper extension allows you to put more pellet
fuel in the hopper and extends burn time on one
load of pellets. The hopper extension adds 60
pounds to the existing 60 pound hopper capacity,
allowing you to load 120 pounds of pellets at one
time.
Part #1-00-08536
Decorative Tile/Grey Slate Options
The decorative tile and slate measure 11.938" x
5.938". The tile/slate frame is necessary to hold
the tile or slate in place on the stove. There are
10 decorative tile choices, and 4 decorative slate
choices. See dealer for samples.
The Brushed Stainless deer cutout, pictured below,
is another option available. This cutout reveals the
color of the stove through the cut out shapes.
5.938"
11.938"
frame
tile/slate
Direct Vent Wall Passthrough Kit
You may choose to use the
optional Direct Vent Wall
Passthrough Kit (part #1-00-
677077) which incorporates
v e n t i n g p a s s t h r o u g h
and outside air into one
component.