Filter
Top Products
Exception TL200 Wood Stove
14
Exception Linkage Installation
Figure 1
Step 1: Remove left side shield
The side shield has tabs on it that latch into holes on the
side of the stove. This makes removing the side shield
easy.
•
Lift up on the side shield then pull out.
Drive Arm Assembly
Heavy Washer
1/4 x 20 x 1/2" Bolt
Figure 2
•
With left hand, slide new drive arm through hole in side
of stove. With right hand, take 1/4 x 20 grade 8 bolt along
with washer and insert through hole from inside of stove.
Tighten snugly using a 7/16" wrench.(Shown in Fig. 2)
Step 2: Install the drive arm
slots for
side
shield
tabs
Before side shield
is in place.
Figure 3