Filter
Top Products
16
INSTALLATION
Only For Qualified Installers
Assembling the Victorian Face
1. Position the mantel face down on the floor.
2. Place the left piller over the two studs on the
left side of the mantel. Install two washers and
nuts and tighten.
3. Place the left side of the breast plate into the
slots on the left pillar.
4. Place the Left hinge pin of the top grill door
into the round hole in the pillar.
5. Place the left hinge pin of the bottom grill door
into the round hole in the bottom of the pillar.
6. Place the right pillar over the studs on the right
side of the mantel face while simultaneously
placing right ends of the doors and breast plate
into their slots on the right pillar. Some assis-
tance is helpful.
7. Install any decorative panels at this time.