Filter
Top Products
3
Introduction
The Harman Clarity 929BV Vented Gas Heater is a
listed gas-red vented room heater tested by Intertek
Testing/Warnock Hersey to ANSI standard Z21.88-
2002, CSA 2.33-M02, and CAN/CGA-2.17-M91.
The installation of the Clarity Vented Gas Heater
must conform with local codes, or in the absence of
local codes, with the current edition of National Fuel
Gas Code, ANSI Z223.1 — latest edition and CAN
1-B1-149.1 and .2 Installation Code.
The Clarity 929BV is not for use in mobile homes.
CAUTION: This appliance must be vented to the
outside.
Installation and repair of the Clarity Vented Gas
Heater should be done by a qualied service person.
The appliance should be inspected before use and at
least annually by a qualied service person. More fre-
quent cleaning may be required due to excessive lint
from carpeting, bedding material, etc. It is imperative
that control compartments, burners, and circulating air
passageways of the Clarity be kept clean.
When operating your Harman Clarity Gas Heater,
respect basic safety standards. Read these instructions
carefully before you attempt to operate the heater.
Failure to do so may result in damage to property or
personal injury and may void the product warranty.
Consult with your local building code agency and
insurance representative before you begin your instal
-
lation to ensure compliance with local codes, including
the need for permits and follow-up inspections.
Several issues must be addressed when selecting a
suitable location for your Clarity Gas Heater. Observ
-
ing required clearances to combustible materials, the
proximity to a safe chimney or venting system,and
the accessibility of the gas and electrical supply must
all be considered. In addition, selecting a location that
takes advantage of the building's natural air ow is
also desirable to maximize the heating effectiveness
of the heater. In many cases, this is a central location
within the building.
Adequate combustion and ventilation air must be
provided.