Filter
Top Products
5
Installation
Due to high temperatures, the Clarity 828I
Vented Gas Fireplace Insert should be located
out of traffic and away from furniture and drap-
eries.
Children and adults should be alerted to the
hazards of high surface temperatures and
should stay away to avoid burns or clothing
ignition.
Young children should be carefully super-
vised when they are in the same room as the
Clarity 828I Fireplace Insert.
Clothing or other flammable materials should
not be placed on or near the Clarity 828I.
Surveiller les enfants. Garder les
vêtements, les meubles, l'essence ou
autres liquides à vapeur inflammables lin
de l'appareil.
Unit to sidewall or
combustible trim .......................... 10" (254 mm)
Unit to mantel and
combustible trim, unprotected.. 12" (305 mm)
In addition to these clearances, adequate acces-
sibility clearance for servicing and proper operation
must be maintained.
Do not in any way obstruct the combustion air
inlets that are located on the front of the heater.
If the unit is to be installed on carpeting, vinyl, or
other combustible material other than wood floor-
ing, the appliance shall be installed on a metal or
wood panel extending the full width and depth of
the appliance.
PRELIMINARY STEPS TO PREPARE FOR
THE INSTALLATION OF THE CLARITY FIRE-
PLACE INSERT
CLEARANCES
The following clearances to combustibles must be
observed:
Clearance from unit to sidewall or combustible
trim
10"
Clearance from top of unit to mantel
and combustible trim, unprotected
12"
10"
WALL
Evaluation notes were added to the output document. To get rid of these notes, please order your copy of ePrint IV now.