Harbor Freight Tools 69039 Garage Door Opener User Manual


 
Page 3For technical questions, please call 1-800-444-3353.Item 69039
IMPORTANT SAFETY INFORMATION
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common sense
and caution are factors which cannot be built into this product, but must be supplied by the operator.
Assembly Precautions
1. Do not assemble in windy conditions.
2. Assemble and install only on
flat, level, hard surface.
3. Assemble and anchor only according to
these instructions. Improper assembly or
inadequate anchoring can create hazards.
4. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
5. Keep assembly area clean and well lit.
6. Keep bystanders out of the area during assembly.
7. Do not assemble when tired or when under
the influence of drugs or medication.
8. Product capabilities apply to properly and
completely assembled product only.
Use Precautions
1. Do not use grill or any other type of
fire under cover. Cover may catch fire
if exposed to heat rising from fire.
2. Do not allow snow or debris to
accumulate on this item.
3. Heavy, wet snow or strong wind could cause
damage or sudden collapse. Remove the Cover
when these or similar conditions are expected.
4. This product is not a toy. Do not allow
children to play with or near this item.
5. Use as intended only.
Do not use for long-term shelter.
6. Inspect regularly, tighten all loose hardware and
loose cords, and secure all loosened anchors.
If any parts are damaged, bent, or stretched, they
must be replaced. Hardware may loosen during
normal operation stresses. Loose hardware
or damaged/altered parts will compromise
the structural integrity of this product.
7. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
SAVE THESE INSTRUCTIONS.
SAFETYMAINTENANCE ASSEMBLY