Filter
Top Products
Page 11For technical questions, please call 1-800-444-3353.Item 69039
Door/Back Cover (19, 20) Installation
1. Position the Door Cover (19) near where you want the front of the Portable Garage, and turn it so
that the zipper faces the outside of the Portable Garage, and the warning tag faces inside.
2. Disconnect the Rail (3) from the 3-Way Ridge Connector (5-1), and place the gap at the
top center of the Door Cover (19) around the Ridge Connector (5-1), as shown. Note that the
Door Cover’s (19) flaps wrap around the Rafters (2), and the Rope (21) is positioned inside the frame.
Reconnect the Rail (3) securely to the 3-Way Ridge Connector (5-1).
Figure P: Door Cover (19) Installation
Place rope
and flaps
inside frame.
5-1
5-1
5-2
5-3
3
3
3
3
zipper
3
3
3
19
3. Repeat step #2 for the 3-Way Side Connectors A/B (5-2, 5-3) so that the
Door Cover (19) looks as shown in the illustrations above.
22
Figure Q: Securing Door Cover
4. Use Ratchet Tie-downs (22) to attach the Cover to the Corner Legs (23),
see Securing Ratchet Tie-downs (22) on page 10 and Figure Q.
5. Repeat steps #1 – 4 above to install the Back Cover (20) to the other end of the Portable Garage.
SAFETYMAINTENANCE ASSEMBLY