Filter
Top Products
Page 2SKU 03914
Specifications
ITEM DESCRIPTION
Machine Type
Heavy duty, industrial sewing machine; high
speed, single needle-lock stitch
Drive V-belt driven
Action
Foot pedal operation, along with a knee and
manual lifting arm for presser foot. Presser
tension adjustment
Sewing Thickness 5/16 inch maximum
Feed Type Link style needle feed reduces slippage
Sewing Directions Forward and reverse feed
Stitching Speed 5500 Stitches per minute
Motor Type
Clutch motor; 3450 RPM, 5.8 amps, 110 VAC at
60 Hz; single phase
Overall weight 61.6 lbs
Machine Dimensions 20-3/4 (L) x 10 (H) inches
Accessories
- Screwdrivers
- 3 Bobbins
- Small lubricating bottle with tip
- 10 pack of needles
- Power Switch
Table Stand Kit Table Stand Kit (Model 03929) not included
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
Rev 04/03 REV 05/03 REV 03/04
Caution: Make certain that the voltage switch on the motor is set correctly
for your use. See page 6.
This Machine requires oil to be added before use -see page 6 for details.
110/220V,