Filter
Top Products
23U32-5 FPI Direct Vent Gas Insert
HAMPTON
®
CAST
GRILL INSTALLATION
Note: The top grill should be placed with the curved
cut-out facing up.
11) Mount the cast faceplate panels onto the insert body, sliding the
side fi ller brackets into the space between the glass and the fi rebox.
Secure using the 4 remaining black screws, 2 per side.
U31 ONLY:
Install the glass trim by inserting the side hooks on the glass trim
into the 4 slots between the faceplate and the glass. Push the
glass trim down fi rmly with both hands to lock into place.
Slide side fi ller bracket
into gap between
glass and fi re box.
Side Hook
Slots
12) To put on the Hampton
®
logo, peel the sticker from the back of the
logo and place it centered on the bottom left hand corner of the
faceplate.
Hampton
®
Logo
Left Side
Faceplate
Before the grills are installed, a grill stop bracket needs to be put in
place.
1) The U32 grill stop bracket is installed in the bottom left corner just
under the fi rebox as shown below.
2) Place top grill into brackets located inside top of fi rebox as shown.
Bracket inside
top of fi rebox.
3) The bottom grill, shown in the diagram below, has 2 hinges that are
attached to the lip on the bottom of the unit. Secure using 2 screws
per hinge.
U32 Grill
Stop
Bracket
Bracket
Top Grill
INSTALLATION