Filter
Top Products
No modifications accepted (Packaged units only)
PACKAGE ONE - MAS G 3636 IBS 3P MAS
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
10” Diameter x 1/2” Deep
Recess Around Drain Core
UPC/SKU NUMBERS
:etaD:dengiS
Contact Phone Number:
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
Praxis Quality Installation Assurance Program Information: Phone: (800)-759-7744 ext: 29.
Customer Service: (800)-443-7269 Fax: (731)-925-0379
This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.
Important installation procedures MUST be followed for the fixture to be granted a warranty.
ANSI Z124.2
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
Right Hand Valve:
CONTRACTOR
CONTRACTOR
MAS COMPLIANCE REQUIREMENTS
High gloss gelcoat finish
Low threshold entry
Three piece design
White padded fold up seat
Stainless steel grab bar
A
B
CD
20
40”
18
39
7”
1”
8
5”
8
2
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR
IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY
INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.
ATTENTION PLUMBING CONTRACTOR!!!
MASSACHUSETTS
ARCHITECTURAL
ACCESS BOARD
MAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
For MAS compliance Installed accessories must include: peened L-grab bar, padded L-shaped fold up seat, pressure balancing
mixing valve, hand held shower with 30” slide bar, vacuum breaker and 60” hose.
Unit and accessories must be installed per MAS and Praxis guidelines.
NOTE: Back wall grab bar must be un-bolted during shower installation.