Hamilton Electronics A 6436 IBS Plumbing Product User Manual


 
For MAS compliance, installed accessories must include peened L-grab bar, padded fold up seat, pressure balancing mixing valve,
hand-held shower with 30” slide bar, vacuum breaker and 60” hose. Unit must be installed so threshold is no more than 1/2” above
the finished floor. Unit and accessiories must be installed per MAS and Praxis Guidelines.
PACKAGE ONE - MAS G 3698 IBS MAS
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
High gloss gelcoat finish
Low threshold entry
Corner accessory shelves
Padded fold up seat
Stainless steel grab bars
UPC/SKU NUMBERS
:etaD:dengiS
Contact Phone Number:
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
Praxis Quality Installation Assurance Program Information: Phone: (800)-759-7744 ext: 29.
Customer Service: (800)-443-7269 Fax: (731)-925-0379
This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.
Important installation procedures MUST be followed for the fixture to be granted a warranty.
ANSI Z124.2
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
Right Hand Valve:
CONTRACTOR
CONTRACTOR
MAS COMPLIANCE REQUIREMENTS
A
B
CD
10” Diameter x 1/2” Deep
Recess Around Drain Core
39
39
1
2
24
15”
1”
1”
2
4
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR
IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY
INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.
ATTENTION PLUMBING CONTRACTOR!!!
N
o modifications accepted (Packaged units only)
MASSACHUSETTS
ARCHITECTURAL
ACCESS BOARD
MAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.