Hamilton Electronics A 6436 IBS Plumbing Product User Manual


 
N
o modifications accepted (Packaged units only)
PACKAGE ONE - ADA/ANSI G 3637 IBS 3P
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
ADA CODES
10” Diameter x 1/2” Deep
Recess Around Drain Core
UPC/SKU NUMBERS
:etaD:dengiS
Contact Phone Number:
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
Praxis Quality Installation Assurance Program Information: Phone: (800)-759-7744 ext: 29.
Customer Service: (800)-443-7269 Fax: (731)-925-0379
This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.
Important installation procedures MUST be followed for the fixture to be granted a warranty.
ANSI Z124.2
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
Right Hand Valve:
CONTRACTOR
CONTRACTOR
ADA COMPLIANCE REQUIREMENTS
For ADA compliance Installed accessories must include: L-shaped fold up seat, horizontal L-grab bar, vertical grab bar near the
entry, pressure balancing mixing valve, hand held shower with slide bar, vacuum breaker and 60” hose.
Unit and accessories must be installed per ADA and Praxis guidelines.
High gloss gelcoat finish
Low threshold entry
Three piece design
HDPE fold up seat
Stainless steel grab bars
A
B
CD
14”
40
25
39
1”
1”
1”
2
2
2
ICC/ANSI A117.1
HUD/ADA
UFAS
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR
IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY
INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.
ATTENTION PLUMBING CONTRACTOR!!!
NOTE: Back wall grab bar must be un-bolted during shower installation.