Filter
Top Products
No modifications accepted (Packaged units only)
PACKAGE ONE - ADA/ANSI/TAS G 6092 TS IBS
A
FRAMING DIMENSIONS
STANDARD FEATURES
STANDARD CODES
ADA CODES
B
CD
32
60
15
16
High gloss gelcoat finish
One piece design
Phenolic fold up seat
Stainless steel grab bars
UPC/SKU NUMBERS
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
ANSI Z124.1
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
ICC/ANSI A117.1
HUD/ADA
UFAS
TAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
1”
3”
1”
1”
4
4
2
4
Right Hand Valve:
For ADA/TAS compliance: seat securely mounted at head end, one horizontal grab bar mounted on the valve wall, two horizontal
grab bars mounted on the back wall, one horizontal grab bar mounted on the head wall and one vertical grab bar mounted on the
valve wall near the entry. Pressure balancing mixing valve, hand held shower with slide bar, vacuum breaker and 60” hose. Unit and
accessories must be installed per ADA/TAS and Praxis guidlines.
ADA/TAS COMPLIANCE REQUIREMENTS
6” x 6” minimum opening
in floor for drain
connection
:etaD:dengiS
Contact Phone Number:
CONTRACTOR
CONTRACTOR
THIS ORDER WILL NOT BE PROCESSED UNLESS
THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS
PROVIDED.
ATTENTION PLUMBING CONTRACTOR!!!
Customer Service: (800)-443-7269 Fax: (731)-925-0379