Filter
Top Products
17
.
5.4 Maintain After Use
1. Turn main power off.
2. Clean the filter, indoor and outdoor units' bodies.
3. Clear dust and obstructions from the outdoor unit.
4. Repaint the rubiginous place on the outdoor unit to
prevent it from spreading.
1. Be sure that nothing obstructs the air outlet and
intake vents. (Fig.10)
2. Check that whether ground wire is properly
connected or not.
3. Check that whether the batteries of air conditioner
are changed or not.
4. Check that whether installation stand of the outdoor
unit is damaged or not. If damaged, please contact
the dealer.
1. Take Down the Air Filters
Pull out the panel to an angle at botttom grooves on
panel. And, pull the air filter upward then downward
to take it off. (Fig. 7).
2. Cleaning
To clean the dust adhering to the filters, you can
either use a vacuum cleaner, or wash them with
warm water (the water with the neutral detergent
should below 45 C) when the filters are very dirty
(such asoil stain), and dry it in the shade. (Fig.8a)
5.2 Cleaning the Air Filters (Continued)
3. Put On Silver Ion Filters (*SAP-K18AMS only)
Put on silver Ion filters, make the side of filter with
net facing you, then cover the surface panel well.
(Fig. 9)
5.3 Check Before You Use
Fig.8a
Fig.10
Fig.7
air filter
Fig.8b
1. In general, the silver Ion filters
should be replaced once every
three months.
2. Dirty silver Ion filters can not be
washed and reused. Purchase a
replacement filter at your local
dealer. (Fig. 8b)
* Silver Ion
filter
Back side
air filter
Fig.9
o
NOTE
Don't use hot water which temperature
is above 45°C to prevent fade or
deformation.
Don't dry it on fire for filter, it would
catch a fire or deformation.
NOTE
5. CLEAN AND CARE
Operation and Maintenance