Filter
Top Products
13
.
4.6 Using of the “SPECIAL” Features & Remarks
• During DRY operation, the fan speed is automatically set to
LOW.
• If the room temp. is 2 °C higher than the Set Temperature, the
unit will run in COOL mode.
• Once the room temp. reaches ± 2 °C of the level that was set,
the unit repeats the cycle of compressor turning “ON” 6 mins
and turning “OFF” 4 mins automatically.
How it works?
“DRY”
Operation
• When AUTO mode is selected, the default temperature will be
displayed on the LCD, the unit will be in accordance with the
room temperature automatically to select the suitable running
method and to adjust ambient comfortable.
How it works?
“AUTO”
Operation
This function indicates that moisture on evaporator of indoor
unit will be blowed after the unit is stopped to avoid mould.
Once blow function is on, while the unit is off by pressing the
ON/OFF button, the indoor fan will continue running for about
10 min. at low speed. In this period, press “BLOW” button
again can stop indoor fan directly.
How it works?
“BLOW”
Operation
During “COOL” or “HEAT” mode, if start this function, the unit
will run at super-high fan speed to cool or heat quickly so that
the ambient temp. approachs the preset temp. as soon as
possible.
How it works?
“TURBO”
Operation
It's a special selective button for the users , who are not
accustomed to the light at sleeping.
When setting the light function, the mark will display on the
remote controller screen by pressing this button. In which case,
the displayer indicator light will be on if the AC receives this
signal.
Setting “OFF ” the displayer indicator light
How it works?
“LIGHT”
Operation
How it works?
“LOCK”
Operation
Press “+” and “-” buttons simultaneously to Lock/Unlock the
keyboard. If the remote controller is locked, the will be
displayed on it, inwhich case, press any button, the mark will
flicker for three times. If the keyboard is unlocked, the mark
will disappear.
Setting “ON” the displayer indicator light
To cancel the light function, the mark will disapper on the
remote controller screen. In which case, the displayer indicator
light will be off if the unit receives this signal.
4. OPERATION OF WIRELESS REMOTE CONTROL UNIT
Operation and Maintenance