Filter
Top Products
Through hole(15x20)
1100
790
Air inlet snow-
proof cover
Air outlet snow-
proof cover
Air inlet snow-proof cover
Refrigerant tube
Above 500mm
Installation Precedure
20
M12 foot screw bolt
4 screws each unit
20mm 20mm 20mm
(1)The distance between two connections must not be less than 20mm.
3. Mounting outdoor unit
Refer to the following figure for the distance between the foundation bolts.
(4)During installation, anti-vibration rubber pads should be used between the
machine and the bracket.
(3)In snowy regions, snow-proof facilities should be used (see the figure right).
(Poor snow-proof facilities may lead to damage.To avoid inconveniences, the
unit should be raised and snow-proof covers should be installed at the air
inlet and outlet.)
(2)When the refrigerant pipe is connected from the bottom of the unit, the unit
should be raised at least 500mm(see the figure
right)
Outdoor Unit