Filter
Top Products
Using Your Steam Cleaner - Operating Instructions
Before Using Your Steam Cleaner cont.
IMPORTANT
This product is NOT for space heating purposes.
CAUTION
CAUTION
Use only a heavy duty extension cord rated for 15 amps minimum – DO NOT use an
ordinary extension cord.
HAAN® Steam Cleaners products emit steam at 212ºF to sanitize the area of use.
This means that the steam head, Ultra-Microfiber Pads and carpet glide get very
hot during use. Care should be taken when using this appliance and DO NOT touch
components of this machine during use except in the approved manner as outlined
in this manual.
1
4
Assemble unit and place on
Floor Protector / Resting Mat.
Tighten cap. Insert tank (cap
down) until it “clicks”.
2
5
Press Water Tank Release but-
ton and remove water tank.
Press the steam power switch.
Wait 20 seconds for unit to heat up.
Unit may vibrate while heating.
3
6
Turn Cap counterclockwise to
Remove. Fill tank with water.
Gently place unit on Ultra-Mi-
crofiber Pad. You are now
ready to steam clean.