GTO SL-2000 Garage Door Opener User Manual


 
40
Replacement Batteries
RB500 The standard 12 volt, 7.0 ampere-hour, maintenance-free battery for all GTO/PRO gate operators.
This is the only battery approved for use with GTO gate operators. Battery life 3 to 5 years.
RB422 –The 12 volt, 1.2 ampere-hour version for use with the Bulldog Pedestrian Gate Lock.
ACCESS-ORIES
Replacement Receivers
The AQ202: Receiver with a 20 ft. cable (included).
The AWQ325: Receiver with a 25 ft. cable.
The AWQ350: Receiver with a 50 ft. cable.
The AWQ400: Receiver with a 100 ft. cable.
Standard Replacement Power Cables for Gate Operators
The PRO 60C (AC202): 60 ft. power cable included with GTO SL-1200 and SL-2200 dual (second) slide gate
operator.
* GTO, Inc. gate operator accessories are warranted by the manufacturer against defects in materials and
workmanship for a period of one year, unless otherwise stated, from the date of purchase provided
recommended installation procedures have been followed. Warranty is considered void if damage was due
to improper installation or use, connection to an improper power source, or was caused by lightning, wind,
fire, flood, insects, or other natural agent.
Standard Replacement Transformer (RB570) –Standard 18 volt AC transformer for GTO/PRO SL-1000
and SL-2000 series gate operators
.
Bulldog Replacement Charger (RB422) Standard 12 volt DC charger for maintaining battery included
with the Bulldog Pedestrian Gate Lock.
GTO/PRO 24 Amp Hour Battery Kit
FB295 – This large 12 volt, 24 ampere-hour, maintenance-free battery is for the GTO/PRO SL-2000&2200
gate operators. It will supply additional power for increasing the number of open and close cycles of the
GTO/PRO SL-2000&2200 operators. The kit comes with the battery, battery pan and wiring harness for easy
installation inside the existing operator housing. This is the only battery approved for use with GTO gate
operators. Battery life 3 to 5 years.
GTO EXIT WAND (FM138)
The GTO Exit Wand is designed for residential and agricultural applications and is compatible with all
the GTO/PRO automatic gate opener models. The Exit Wand is an electromagnetic sensor, which offers
'hands free' operation of automatic gate openers with a 12 ft. radius of detection of vehicles in motion.