Filter
Top Products
39
ACCESS-ORIES
GTO Low Voltage Wire (RB509)
The 16 gauge dual conductor, multi-stranded, direct burial low voltage wire is required to connect the control
board to the solar panel or the AC transformer. This wire is also required for installation of some
accessories such as keypads, locks, or push buttons (available in 1000' rolls and specially cut lengths).
Splice Kit - Direct Burial (RB708)
When direct burial wire running below ground needs to be spliced the RB708 splice kit must be used.
Splice Kit - Above Ground (RB707)
For providing secure and moisture resistant above ground splices for solar panels, key pads, push buttons and
other accessories using GTO low voltage wire.
Pin Lock (RB975)
The pin lock can be inserted in the chain brackets of the GTO/PRO SL-1000/1200 and SL-2000/2200 to
prevent unauthorized removal of the quick release pins.
Operator Solar Panel (FM123 ) - Improved, Amorphous Silicon (Two Year Warranty*)
This 10 watt solar panel is a battery charger for use with GTO/PRO Low Voltage Automatic Gate Operator
systems. Particularly suited for remote installations, the solar panel comes with tubular steel support, mounting
clips, wire connectors, and 8 ft. of low voltage wire (for longer lengths, see RB509). All GTO low voltage
operators are pre-wired for solar panels. Installation in some regions of the world will require multiple panels for
adequate charging power. Recommended for GTO/PRO SL-2000/2200, GTO/PRO SL-1000/1200.
NOTE: GTO/PRO SL-2000 requires the 24 Amp Hour Battery Kit for solar applications.
Operator Solar Panel (FM122 ) - Improved Amorphous Silicon (Two Year Warranty*)
The 5 watt solar panel is a battery charger for use with GTO/PRO Low Voltage Automatic Gate Operator
systems. Particularly suited for remote installations, the solar panel comes with tubular steel support, mounting
clips, wire connectors, and 8 ft. of low voltage wire (see Low Voltage Wire for longer wire). All GTO low volatge
operators are pre-wired for solar panels. Installation in some regions of the world will require multiple panels for
adequate charging power. Recommended for GTO/PRO SL-1000, GTO/PRO SL-2000 and the GTO Bulldog
Gate Lock. Dual gate installations require minimum of two (2) 5 watt solar panels for adequate charging power.
NOTE: GTO/PRO SL-2000 requires the 24 Amp Hour Battery Kit for solar applications.
#41 Slide Gate Chain (RB207)
The #41 chain (32' only) is used with the GTO/PRO SL-1000/1200 and SL-2000/22000 DC Slide Gate
Operators.