Filter
Top Products
30
ENGLISH
30
ENGLISH
Cleaning or replacing the filter
Caution
7
The dust bag and filter must be fitted before
use, otherwise the motor could be damaged.
In the dust housing (motor
protective filter)
1 Open the dust housing by pressing down on
the catch of the dust housing and then lift
up the cover.
2 Pull the dust bag out of the holder, remove
and close.
3 Pull out the filter holder.
4 Remove the filter from the holder.
M
5 Shake the filter vigorously, then clean it in
warm soapy water, rinse thoroughly and
leave it to dry.
Caution
7
Never put the filter in the washing machine
or dry it with a hair dryer.
7
Ensure the filter is completely dry before refit-
ting it.
6 If required, fit a new filter in the holder and
insert the holder again.
7 Re-insert the dust bag.
The air outlet blower
1 Open the air outlet grille by pressing down
on the catch.
CLEANING AND CARE
_________________________________
02_VCC_9850_en:de 10.02.2009 13:20 Uhr Seite 30