Filter
Top Products
26
ENGLISH
26
ENGLISH
Check if the mains voltage on the type plate
(on the bottom of the appliance) corresponds
to your local mains supply.
Assembly
Your appliance is supplied with a fitted dust
bag. Once you have assembled the individual
parts, the appliance is ready to operate.
1 Insert the flexible hose with the flexible con-
tact into the suction intake on the
appliance until it latches in.
Notes
7
To remove the flexible hose , press the
catch on the side of the flexible contact and
pull it out.
7
When operating, the flexible contact
allows the flexible hose to swivel by 360°.
This facilitates cleaning considerably.
2 Insert the other end (handle) of the flexible
hose into the extendable suction tube .
R
O
I
N
N
3 Insert the required brush or attachment into
the lower end of the extendable suction tube
.
4 Press and turn all the connectors to plug them
in and release again by pulling and turning.
Note
7
Never operate the appliance without the dust
bag. The cover of the dust housing will not
close without the dust bag being in place.
R
PREPARATION
____________________________________________
02_VCC_9850_en:de 10.02.2009 13:20 Uhr Seite 26