Filter
Top Products
ENGLISH
29
ENGLISH
29
Changing the dust bag
1 Disconnect the power cord from the wall
socket.
2 Open the dust housing by pressing down on
the catch of the dust housing and then lift
up the cover.
3 Remove the dust bag from its holder.
4 Seal the dust bag by inserting the catch of
the cardboard reinforcement into the open-
ing.
5 Dispose of the sealed dust bag.
Caution
7
Never attempt to empty the dust bag and
then use it again.
Note
7
The dust container cover cannot be closed
before a new dust bag has been inserted.
Never use force to close the cover.
M
6 Insert the new dust bag into the holder.
7 Close the cover of the dust housing.
Note
7
Check the appliance works after changing
the dust container. If the suction power is still
inadequate, the attachment tools, tubes or
filter could be blocked (see the following
section).
Removing blockages
1 Disconnect the power cord from the wall
socket.
2 Check the following parts:
– the flexible contact of the elastic hose.
– the contact between the guiding grip
and the extendable suction tube.
– the contact between the extendable suction
tube and the floor brush or other
attachments.
N
R
P
CLEANING AND CARE
__________________________________
02_VCC_9850_en:de 10.02.2009 13:20 Uhr Seite 29