Filter
Top Products
-20-
G0631 79" x 28" Downdraft Table
Review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-
ops. If you need replacement parts or you are unsure of your repair skills, then feel free to call our Technical
Support at (570) 546-9663.
SECTION 7: SERVICE
Troubleshooting
Motor & Electrical
Symptom Possible Cause Possible Solution
Machine does not
start or a fuse/
breaker trips.
1. Fuse/breaker has blown.
2. Switch disabling key is removed or at fault.
3. Motor is at fault.
4. Capacitor is at fault.
1. Correct short/replace fuse/replace breaker.
2. Install/replace switch disabling key; replace switch.
3. Correct motor wiring connections or replace bad
motor.
4. Replace capacitor.
Machine has vibra-
tion or noisy opera
-
tion.
1. Fan is bent or loose.
2. Motor or component is loose.
1. Adjust fan balance or replace fan.
2. Inspect/replace stripped or damaged bolts/nuts, and
re-tighten with thread locking fluid.
Operations
Symptom Possible Cause Possible Solution
Downdraft table
does not adequately
collect dust; poor
performance.
1. Dust collection drawer is full.
2. Filter is dirty.
1. Empty collection drawer.
2. Knock dust off filter. If this has no effect, replace with
new filter unit.