Filter
Top Products
G0631 79" x 28" Downdraft Table
-19-
SECTION 6: MAINTENANCE
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check
:
• Check filters.
• Dust drawers.
• Loose mounting bolts.
• Worn or damaged wires.
• Any other unsafe condition.
Weekly Maintenance:
• Check filters.
• Dust drawers.
Monthly Check:
• Clean/vacuum dust buildup from inside cabi
-
net and off motors.
Schedule
Cleaning the Model G0631 is relatively easy.
Vacuum excess sawdust, and wipe off the remain
-
ing dust with a dry cloth. If any resin has built up,
use a resin dissolving cleaner to remove it.
Cleaning
Keep the downdraft table
unplugged during all
maintenance procedures.
Ignoring this warning may
result in serious personal
injury to you or others!
Always wear a dust mask
and safety glasses when
servicing and changing
filters. Sawdust may
cause allergic reactions
or respiratory problems.
To service the filters:
1. DISCONNECT POWER TO THE
DOWNDRAFT TABLE!
2. Remove the two outside downdraft plates,
remove the filters, and gently knock the filters
out inside a garbage can
.
Note: Generally this technique will work two
or three times, then you will have to replace
the filter.
3. Reinstall the filters and the downdraft plates.
To change a filter:
1. DISCONNECT POWER TO THE
DOWNDRAFT TABLE!
2. Remove the outside downdraft plates, remove
the filters, install new filters, and reinstall the
plates.
Filters
The filters may need to be serviced or replaced if
suction is noticeably reduced. The amount of use
has a direct bearing on how often you must ser
-
vice or change the 1" prefilter and 2" filter.
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person
-
al injury.