Filter
Top Products
Step 14
Locate the left speaker frame. Position the frame inside the opening
beneath the top of the mantel. From the back, line up the holes, insert
and tighten the 2 wing nut and lock washers.
Repeat step 14 for the right speaker frame.
Step 15
Locate the central door for the central top shelf. Line up the 4 holes
between the hinges and the door, insert and tighten the 4 screws. If the
doors need to be straightened when you are done, just loosen the screws,
level the door and re-tighten all 4 screws. Position one end of the left door
support to the 2 guide holes in the left side panel (interior), insert and
tighten 2 screws. Repeat for the right door support.
Step 16
Slide the left base shelf into position on the bottom of the left storage area
to cover the supports and the hardware. Locate the shelf mounting pegs.
Insert the pegs into the 2 holes on the left side of the mantel. Slide in the
left adjustable shelf.
Step 17
Locate the left door for the left storage area. Line up the 4 holes, insert and
tighten the 4 screws. Repeat for the right door and the right storage area. If
the doors need to be straightened when you are done, just loosen the
screws, level the door and re-tighten all 4 screws. Repeat for the right side.
Step 18
Locate the Audio System manual for the YY.AUD.10203. Please follow the directions in this manual to
hook up all your audio components.
5