Filter
Top Products
Step 5
Locate the left top shelf. Position it on the 4 supports on the left side
panels – 2 on the exterior and 2 on the interior panels. From below line up
the holes in the supports with those of the top shelf, insert and tighten the 4
wing nuts and lock washers.
Step 6
Locate the central panel. Insert the 2 dowels on the cental panel into the
dowel holes on the left side panel (interior) which are at the same level as
the left lower panel.
Step 7
Locate the right side panel (interior) and position it on the right side
(interior) of the base. Insert the 2 dowels located on the right side of the left
lower panel into the dowel holes on the right side panel (interior). Line up
the holes on the right side panel (interior) and the base, insert and tighten
the 2 wing nuts and lock washers.
Step 8
Locate the central top shelf (with hinges) and set it on top of the left and
right interior panels. From the top, line up the 4 holes (2 on each side),
insert and tighten 4 wing nuts and lock washers.
3
Rear View
Rear View