Filter
Top Products
Step 9
Locate the support panel for the top of the mantel. Insert the dowels
on the side of the support panel into the dowels holes in the left side
panel (exterior). Line up the support in the middle of the support panel
with the hole in the central top shelf. From the top, insert and tighten the
1 wing nut and lock washer.
Step 10
Locate the right lower panel, right interior shelf and the right back panel.
Insert the dowels on the right lower panel into the dowel holes on the right
interior side panel. Insert the dowels on the side of the right interior shelf
into the dowels on the right interior side panel. Slide the right back panel
into the groves on both the right interior shelf and the right interior side
panel.
Step 11
Locate the right top shelf and slide the shelf onto the supports located on
the right interior side panel. Line up the holes, insert and tighten the 2
wing nut and lock washers.
Step 12
Locate the right side panel (exterior) and position it on the right side
(exterior) of the base. Ensure the 2 top supports go under the right top
shelf. Ensure the 2 dowels on the support panel for the top of the mantel
go into the dowel holes on the right exterior side panel. Ensure the dowels
on the side of the right lower panel go into the holes on the right exterior
side panel. Ensure the dowels on the side of the right interior shelf go into
the holes on the right exterior side panel.
Line up the 2 holes between the right exterior side panel and the base, insert and tighten the 2 wing nuts
and lock washers. Line up the holes between the 2 supports on the right exterior side panel and the holes
on the right top shelf. From below insert and tighten the 2 wing nuts and lock washers.
Step 13
Get your assistant and locate the top of your mantel. This top is very heavy.
It will take 2 people to lift and position the top into place. Ensure the top
goes over the sides and the front support. Once you have lined up all the
holes, from inside insert and tighten 6 wing nuts and lock washers.
4