Filter
Top Products
Installation
8 309967C
Models 246911, 246913, 253385 and 253386
(FIG. 3)
1. Remove the fluid outlet adapter included with the
pump, and screw the holster (6) into the pump outlet
using thread sealant.
2. Models 246913 and 253386: Assemble the truck (7)
as shown in the parts drawing on page 13. Secure
the truck pail (10) to the truck base with the pointed
clamps (7d) and thumbnuts (7c).
3. Remove the cover from the pail of lubricant. Place
the pail of lubricant into the truck pail.
4. Secure the cover (4) on the pail with the three
thumbscrews (A).
5. Install shim (11) on top of drum. Align holes in shim
with holes in cover (4).
6. Insert the pump riser tube through the top of the
shim (11) and cover (4). Lower the pump until it
rests on the shim and cover.
7. Assemble the gun (2b) and hose (2a), and connect
the hose to the pump fluid outlet.
8. Connect the nipple (2d) to the pump air inlet or air
regulator (9b) inlet, whichever is applicable. Con-
nect the quick-disconnect coupler (2c) to the air
supply hose.
FIG. 3
Model 253386 shown
01514
2a
4
A
7c, 7d
10
6
2c
9b
2b
2d
7
11