Graco P40RCM Heat Pump User Manual


 
Models
312376L 3
Models
Check your pump package’s identification (ID) plate (located on side of air
motor) for the 6-digit part number of your pump package. Use the following
matrix to define the construction of your pump package, based on the six dig-
its. For example, pump package P29RSM represents the pump package (P); a
pressure ratio of 29:1 with an NXT3400 motor and a 250cc displacement pump
(29); a low noise motor with remote DataTrak (R); and a displacement pump
constructed of stainless steel (S) with MaxLife
®
coatings, packings, and
enclosed wet cup (M).
To order replacement parts, see Parts section starting on page 22. The digits in the matrix do not correspond to the
Ref. Nos. in the Parts drawings and lists.
Some configurations in the following matrix cannot be built.
See the Product Selection Guide for available systems.
PART NO.
SERIAL SERIES
Artwork 293287
MAX AIR WPR RATIOMAX FLUID WPR
MPa
bar
PSI
MPa
bar
PSI
GRACO INC.
MPLS, MN
ID plate located on side of
air motor.
P29 R SM
First
Digit Second and Third Digits Fourth Digit Fifth Digit Sixth Digit
Pressure
Ratio
(xx:1) Motor
Displacement
Pump Volume
(cc)
Motor / Remote
DataTrak
Displacement
Pump Material
Coatings,
Packings,
Enclosed Wet
Cup
P
(pump)
05 NXT200 60
L Low Noise; NO DataTrak C Carbon Steel S
Severe Duty
®
11 NXT400 60
R Low Noise;
Remote DataTrak
S Stainless Steel M
MaxLife
®
14 NXT3400 500
M Low Noise; Data Trak
20 NXT700 60
S Low Noise, High Level
Sensor
23 NXT2200 200
D De-Icing; NO Data Trak
26 NXT6500 500
E De-Icing; Data Trak
29 NXT3400 250
36 NXT3400 200
38 NXT1200 60
39 Premier 500
40 NXT2200 100
55 NXT6500 250
61 NXT1800 60
63 NXT3400 100
68 NXT6500 200
82 Premier 250