Filter
Top Products
Copyright All Rights Reserved.
P-MU-AD425S Ver. A Publish:2008.07.11 Page: 15/ 20
Steps Figures Explanation
Step 18.
Tighten screws.
Step 19.
Insert screws (6 x 95 mm) to the Operating Arm on
Square See the figure presented for a out-swing door
(Right-Hand Open), more details shown in Figure 9.
Step 20.
Tighten nut at other end of screw.
Step 21.
Use the 10mm wrench to tighten nuts.
Step 22.
Insert pin to avoid the screws from loosing.
Step 23.
Slide the Operating Arm to Sliding Rail.