Filter
Top Products
Copyright All Rights Reserved.
P-MU-AD425S Ver. A Publish:2008.07.11 Page: 14/ 20
Steps Figures Explanation
Step 12.
Use Allen Wrench to tighten the Blind Nut. This will
compress the screw so that it remains permanently
fixed in the hole. Repeat these steps on other Blind
Nuts. (Do not over tighten the Blind Nut.)
Step 13.
Blind Nuts installation completed.
Step 14.
Insert two mounting screws. (Screw specification: 6 X
20 mm)
Step 15.
This is the position of Mounting Hanger.
Step 16.
Mount the automatic door operator.
Step 17.
Tighten the other 4 screws. (Screw specification: 6 X
20 mm)