Filter
Top Products
iNSTALLATiON OF LENSAND BULB
A Install a light bulb (1O0Watts or less)(not included) into Light
Socket (Figure 14):
• Rough service, 130 Volt bulbs are recommended.
B Install Lens into slots in Motor Cover.
• Insert Bottom hinges into slots provided in metal front
cover of Power Head.
• Flip Lensup and fasten with molded latches on lens.
Figure 14 Install Lens and Light bulb
NOTES
Transmitter Compliance Statement
Transmitters comply with all United States and Canadian legal requirements as of the
date of manufacture No warranty is made that they comply with all legal requirements of
any other jurisdiction.If transmitters are to be used in another country, the importer must
determine compliance with any local laws and regulations which may differ from United
States and Canadian requirements prior to use.
Los transmisores cumplen con todas las reglamentaciones [egales de los Estados Unidos y
del Canad&, en [a fecha de fabricaci6n. Ninguna garantfa se da que cumplan con todas as
reglamentaciones legales de ninguna otra jurisdicci6n. Si los transmisores se van a utilizar
en otro pals, el importador debe determinar si cumplen con las reglamentaciones y [eyes
locales que puedan ser diferentes a las reglamentaciones de los Estados Unidos y del
Canad& antes de usar los mismos.
Les emetteurs sont conformes _ la reglementation am_ricaine et canadienne _ compter
de leur date de fabrication. Aucune garantie n'est stipul6e indiquant qu'ils sont conformes
routes [es prescriptions juridiques d'autres autorit_s. Si les _metteurs sont utilis_s dans
d'autres pays, i[ incombe a I'importateur d'en d_terminer leur conformit_ aux lois et
regles locales pouvant diff_rer de celes des Etats-Unis et du Canada avant toute
utilisation desdits _metteur£
Sendeger_ite entsprechen allen gesetzlichen Bestimmungen in den USA und Kanada zum
Zeitpunkt der Herstellung,Wir Obernehmen keine Gew_ihrleistung for die Einhaltung aller
gesetzlichen Bestimmungen in anderen Lindem. Sollen Sendegerite in anderen L_ndem
eingesetzt werden, so muss der Importeur vor dem Gebrauch sicherstellen, dass die
Sendeger_te auch solchen Iokalen Bestimmungen entsprechen, wekhe yon den
Bestimmungen der USA und Kanadas abweichen.
nlF+-t iOl 71El Ef-_--_ xlgqlAt +,"-f&_-I _-,'q:>- _-_°_;q_i,q_SFTlO_l o_,,ti _lq_t _HI-F.F_P--IS_
F&_,_I _l-@_Cl_____ :::z _Cl c" I _'_f __allOtl [qe-l-oi: _;q°l o:i _ z_oHof
IMPORTANTSAFETYINSTRUCTIONS
WARNING--
TO REDUCE THE RISK OF
SEVERE INJURY OR DEATH
1 READAND FOLLOWALLINSTRUCTIONS.
2 Never let children operate or play w th the Doo_
Controls. Keepthe Remote Control away from children.
3 Always keep the moving door in sight and away from
people and objects until the door iscompletely closed.
NO ONESHOULD CROSSTHE PATH OF THE
MOVING DOOR.
4 NEVERGO UNDERA STOPPED,PARTIALLY
OPENDOOR.
5 TestOpener monthly,. The door MUST reverse on
contact with a 1-1/2 high object (ora 2 x 4 board
laid flat) at the center of the doorway on the floor. After
adjusting either the Forceor the Limit of travel, retest
the Door Opener. Failureto adjust the Opener properly
may causesevere injury or death,
8 When possibleusethe EmergencyReleaseonly when
the door isc osed. Usecaution when using this Reease
with the dooropen. Weakor brokenspringsarecapable
of increasingthe rateof door closureandincreasingthe
riskof severeinjuryor death.
7 KEEPGARAGEDOORS PROPERLYBALANCED. See
Owner's Manual. An improperly balanced door increases
the risk of severe injuryor death. Havea Genie Factory
Authorized Dealermake repairs to cables,spring
assemblies,and other hardware.
8 SAVETHESEINSTRUCTIONS.
For Help, call 1-800-3S-GENIE or visit www.genie¢ompany.com