Filter
Top Products
Sometimes, a manually started regeneration (recharge) may be
desired or needed.
Two examples:
■ You have used more water than usual (house guests, extra
washing, etc.) and you may run out of soft water before the next
regeneration.
■ You did not refill the storage tank with salt.
Use one of the following features to start a regeneration
immediately or at the next preset regeneration start time.
RECHARGE NOW
Press and
hold
the
TOUCH
or
HOLD
button until
RECHARGE NOW
starts to flash in the time display area. The water softening system
begins an immediate regeneration and, when over in about two
hours, you will have a new supply of soft water. Once started, you
cannot cancel this regeneration.
RECHARGE TONIGHT
Touch (do not hold) the
TOUCH
or
HOLD
button.
RECHARGE
TONIGHT
flashes in the time display area. A regeneration will occur
at the next preset regeneration start time. If you decide to cancel
this regeneration, touch the same button once more.
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
11
Normal Operation, Timer Displays
Feature: Optional Recharge Controls
RECHARGE TONIGHT
RECHARGE NOW
TOUCH
HOLD
or
During normal operation, the present time of day and AM or
PM shows in the time display area . When the demand
computer determines a regeneration is needed,
RECHARGE
TONIGHT
begins to flash in the display, along with the present time.
RECHARGE TONIGHT
flashes until the next regeneration
start time, then changes to
RECHARGE NOW,
which flashes until the
regeneration is over. The display also shows the current cycle in the
regeneration process. When the valve is in transition between
cycles, both indicators flash.
PM
RECHARGE TONIGHT
PM