Filter
Top Products
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
About the water softening system.
10
NOTE:
If
HARDNESS
does not show in the display, press
SET
button
until it does.
Press the UP or DOWN button to set your water hardness
number in the display. The DOWN button moves the display
down to 1. The UP button moves the display up to 110.
NOTE:
Each press of an UP or DOWN button changes the display
by 1 between 1 and 25. Above 25, the display changes 5 at a
time…25, 30, 35, etc. Holding a button in changes the numbers
twice each second.
When the water hardness number shows, press
SET
to apply.
You can get the grains per gallon (gpg) hardness of your water
supply from a water analysis laboratory, or call and ask your
local water department, if you are on a municipal supply.
2
1
Set Water Hardness Number
NOTE:
If the words
PRESENT TIME
do not show in the display, press
the
SET
button until they do.
Press the UP or DOWN button to set. The UP button
moves the display ahead; the DOWN button moves the time
backward. If the present time is between noon and midnight,
be sure PM shows . If the present time is between
midnight and noon, be sure AM shows .
NOTES:
Each press of an UP or DOWN button changes the time by
one minute. Holding the button in changes the time 32 minutes
each second.
When the present time shows in display, press
SET
to apply.
2
1
Set Present Time of Day