Filter
Top Products
GE Security
g
Setting the system date
Step 1 Enter [r] [9][6].
Step 2 Enter [master code].
Step 3 Enter the “Day of Week “
1 = Sunday 3 = Tuesday 5 = Thursday 7 = Saturday
2 = Monday 4 = Wednesday 6 = Friday
Step 4 Enter the “Month Code”. Must always be two (2) digits.
01 = January 05 = May 09 = September
02 = February 06 = June 10 = October
03 = March 07 = July 11 = November
04 = April 08 = August 12 = December
Step 5 Enter the “Day Code”. Must always be two (2) digits.
Example: The 5
th
would be entered as [0] – [5].
Step 6 Enter the last two digits of the “Year Code”.
Example: For 2003 enter [0] – [3].
KEYPAD CONTROL TONES (BEEPS)
A sounder is built into the keypad. If programmed, your system keypad may sound for any of the following
reasons:
• Beeps for all keypresses.
• Sounds a continuous tone during the Entry delay time.
• Pulses when a day zone is violated while the system is disarmed.
• Pulses when a FIRE zone has a trouble condition.
• Beeps 3 times for trying to arm with the “Ready” light off, if “Force Arming” has not been selected.
• Beeps for 1 second or emits a “ding-dong” sound for the “Chime” feature.
• Beeps during an exit delay; beeps rapidly for the last 10 seconds of an exit delay; and beeps 1
second at the end of the exit delay.
• Pulses when the armed status changes and the AC power is off.
• Pulses when the armed status changes and any zone(s) are bypassed.
• Pulses when the armed status changes and a low battery is detected.
• Pulses when the armed status changes and a Tamper condition is detected.
• Beeps to indicate Telephone Line Cut, if selected.
• Pulses when one or more of the following conditions are detected: Zone or Box Tamper, Low Battery,
AC Power Fail, or Expander trouble.
• Beeps 3 times every minute indicating a low battery or missing transmitter is detected (if wireless
device is in system). Entering code will suppress the sounder for 12 hours.
Entering a valid code will silence the keypad sounder when it is pulsing. The arm/disarm state of your system
will not change when entering a code to silence a pulsing keypad sounder. Please contact your installer if a
trouble condition exists.
NX-108/116/124E User manual Page 15 04/10/04