Filter
Top Products
Cooling Descriptions
I
4
>.*.—
‘ FORNORMAL COOLING
FORMAXIMUM COOLING
FORQUl~
~Select
MEDCOOLwith the Select HIGHCOOLwith the
Select LOWCOOLwith the
!
temp at 4 or 5. temp at 8 or 10.
temp at 3 or
4.
/
.
ON
~m
NORMAL
Ymr model will look
lilw orw of these.
#OlullM~
SNERSV
aAvlNss
I&r
A
A
Energy Saving
The energy saving switch
controls the fan. On some
models, this feature is on the
mode control knob. Other
models use a separate selector
switch.
ON or ENERGY SAV/N&the fan
c
and compressor cycle on and off
together. This results in wider
.
variations of room temperature
and humidity. Normally used
when the room is unoccupied.
NORMAL–the fan runs all the
time, while the compressor
cycles on and off. This switch
must be set at NORMAL in order
to use the fan setting (on the
mode control).
.
EXHAUST
NORMAL
A
A
A
‘ Vent Control
The vent control is a lever
located on the control panel.
When the vent control is set at
normal, only the air inside the
room is circulated, cooled
and filtered.
When set at exhaust, some
indoor air will be exhausted
\
\F
A
A
Air Direction
Tabs inside the horizontal
louvers let you control the air
direction left, right or straight
ahead.
from the room. This will reduce
the cooling effect.
5