Filter
Top Products
,
2
3
Center the case in the window.
Lower the window until it touches
behind the air conditioner
top rail. Make sure the bottom
rail is behind the window stool.
Locate the 3 holes that are on
the plate at the front of the case.
Drill 1/8” pilot holes. Using 3
1“ screws attach the case to the
window stool.
Assemble the 2 leveling bolts
and nuts to the support brackets.
4 Attach the support brackets to
the bottom of the case with
1/2” screws, 2 on each side.
5
On the outside, turn the
leveling bolts until each one
makes contact with the wall.
Make sure the back of the case
tilts 1/4” to 3/8” lower than the
front. Tighten the nuts.
A CAUTION:
●
Use a wood block between the
leve/ing bolts and the wall if the
outside wall is weak or if the
weight of the air conditionerfalls
between the studsin the wall.
11